![]() Slide your curtains onto the rod through the loops. Now slide your curtain rod through the hooks (without damaging your walls! Be careful if you’re clumsy like me.) Add your curtain rod, finials and curtains ![]() Then hold up your curtain rod bracket to the shelf bracket and screw all three pieces together. This will secure both the shelf and the curtain rod hook to the shelf bracket.Īnd it will all be super sturdy if you went into the stud. Through the screw holes on the bottom of the shelf bracket, make a pilot hole into your shelf. So plan B was to just take the hook and secure it into the shelf bracket, which looks a lot cleaner anyway. ![]() It was at this point that I realized the IKEA brackets won’t work as they come out too far from the shelf. Now that your brackets are up, put your shelf back on the brackets and make sure it’s centered and in the place you want it. Then you can remove the shelf and ensure the bracket is level vertically, then secure the second screw. Once it’s level and in the place you want it, use your driver to make a pilot hole and then drill the first screw in. Then level the wood by moving the second bracket up or down as needed. Hold the second bracket where you think it should be and place your level on top of the wood. Do this by placing your wood on top of the already-secured bracket and on the other that isn’t yet into the wall. Then for the second bracket, you’ll want to make sure it is level and in the proper place. I cut my two 8’ boards to 6.75’ to total the 13.5’ I needed so the boards would be evenly distributed between the brackets. If you do, by some small chance, have a crazy long window with a beam in the middle like mine, you can follow what I did. You can get many projects completed this way. If you don’t have a saw, you can either ask a friend who does have one to help you, OR you will most likely be able to get your wood cut at the same place you purchased it from. If you have a saw at home, great! Be sure to take every safety precaution and cut your board to your desired length. To do this, you will need a way to cut it. In this case, just simply cut the wood to your desired length. Most likely you have a regular window in a regular size without and barriers in the way. However, we were unable to use the bracket that came with them as they came out too far from the wood due to the window molding (Be sure to measure properly! □), but I was able to screw the hook straight into the shelf bracket, which actually turned out better and looks cleaner that having all those brackets. They come with a wonderful rubber sticker that keeps the curtain rod in place, and for just $1, they can’t be beat. We love these and have used them in many other rooms. It should say this in the item description. Be sure to purchase curtain rod brackets with the ability to hang from the ceiling.If you are also building your shelf to sit directly above your window, purchase a J-bracket, which can be screwed into the wall from above the shelf.So if you purchase a 1×8” board, be sure to buy 8” brackets. Your bracket size should reflect your board size.Yes, I could have purchased a 10ft board and a 4ft board, but I wanted the wood to be equal lengths so that the brackets could be distributed evenly over the window. Unfortunately, I can only fit a 10’ board in my car, so I ended up purchasing two 8’ boards and cut them to 6.75.’Ĭheck out our post on the mistakes to avoid when purchasing lumber here. We used a 1×6 and added 1.5 ft to the width to both sides of the windows, which ended up being 13.5’ on one side and 3’ on the other. Source Your Materialsįor wood, you’ll want to use a 1” thick board to the desired depth of your shelf. I also used a J-bracket for the same reason, which allows you to screw it into the wall from above the shelf instead of below.Īlso measure the approximate curtain length you’ll need. Take into consideration how deep the underside of the shelf will be so you can order the right type of brackets.įor me, I had the window molding directly under the shelf, so even though I had a 1×6 shelf I actually only had about 5 inches to put the curtain rod bracket because the molding was in the way. Remember that your curtains should frame your windows to make them look bigger, so don’t be afraid to raise them up and widen them out (unless you have a beam in the way like I do). Decide how long and how deep you want your shelf to be. Like in any other DIY, measuring is the first step. Curtain rod holder brackets with the capability to hang from the ceiling (this should be noted in the item description).Wood to the desired length & width of your shelf.Read on to see how to make yours! What you’ll need:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |